Delta Plus VECUT41GN Finger Reinforced Cut Resistant Work Safety Gloves
Whether you operate machinery, use blades, knives and other sharp tools or carry sheet metal at work, ensure that your hands are protected from abrasions, cuts and punctures. Delta Plus VECUT41GN Finger Reinforced Cut Resistant Work Safety Gloves are a mediumweight safety glove with a premium quality foam nitrile coating at the palm and fingers. This enhances grip strength whilst ensuring protection against severe and sharp related injuries.
What's Included?
- 1 x Pair of Safety Gloves
Sizing Information for Delta Plus VECUT41GN Nitrile Coated Safety Gloves
To find your perfect size, simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
| Glove Size | Hand Circumference (mm) | Hand Length (mm) |
| Size 7 | 178mm | 171mm |
| Size 8 | 203mm | 182mm |
| Size 9 | 229mm | 192mm |
| Size 10 | 254mm | 204mm |
If you're still struggling, click here to view our comprehensive glove sizing guide
How Do Delta Plus VECUT41GN Cut Resistant Gloves Protect Your Hands?
Avoiding cuts, slices and incisions is incredibly difficult if you're not wearing adequate gloves. The fibres used to construct VECUT41GN Gloves are tightly woven to ensure the tip of a blade cannot penetrate through to your skin.
What Else do VECUT41GN Gloves Guard Against?
Aside from their high cut-resistance rating, they also use a protective nitrile coating to enhance grip strength and stability and minimise drops and slip related accidents. Nitrile is an incredibly stubborn coating that absorbs moisture well, preventing slick moisture build up that can compromise safety.
Protection Ratings and Standards
EN 388
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves' performance when used whilst working in and around mechanical machinery by measuring abrasion, cut, tear and puncture resistance.
The EN 388 Blade Cut Resistance test uses a single sharp implement to repeatedly pressure a glove in order to determine the amount of force required to cause visible and functional damage.
| Hazard | Resistance Rating |
| Abrasion | Level 4 |
| Cut | N/A |
| Tear | Level 4 |
| Puncture Resistance | Level 4 |
| Blade Cut Resistance | Level C |
Still confused? Click here to view our comprehensive guide to all things EN 388
Key Features of the VECUT41GN Cut Resistant Work Gloves
- Polyester knit fabric ensure long lasting comfort on site
- Foam nitrile coating is excellent at absorbing harmful moisture that compromises grip strength
- 13 gauge fabric retains benefits of lighter and heavier, more protective gloves
- Across-the-board brilliant EN 388 abrasion, cut, tear and puncture protection
- Reinforced thumb crotch works to bolster an inherently weak area of the hand
- Fingertip coating enhances dexterity and accuracy for precise handling application
- Easily hand washable for hygienic preservation and odour prevention
- Palm and fingertip coating leaves back of the glove open to encourage natural perspiration release
- Supplied in a stylish grey and black design
- Slightly extended 10cm wrist cuff keeps glove in place and prevents fabric "ride up"
- High Level C cut-resistance rating
- Available in four different sizes for a guaranteed fit
Suitable Environments and Applications for Delta Plus VECUT41GN Cut Resistant Safety Gloves
Delta Plus VECUT41GN Gloves provide incredible cut-resistance and the enhancement of grip and fingertip strength. This makes them ideal for a range of professions, some of which we have listed for you below:
What Are the Practical Benefits of a Nitrile Coating?
Nitrile is brilliant at absorbing moisture and liquid. Whether you work indoors or outdoors, microscopic beads of sweat, grease, moisture and liquid linger on the palm of your glove, compromising your safety. Nitrile works to "suck" these up, reinforcing your grip and preventing slips and drops.
Why Leave the Back of the Glove Uncoated?
A palm and finger only coating allows the back of a glove to breath and release odour, sweat and perspiration throughout the day. This doesn't compromise your safety or ability to work, as the entire glove is cut resistant and the area responsible for grip strength remains coated in premium nitrile.
What Does a Reinforced Thumb Crotch Do?
A reinforced thumb crotch refers to the area between the thumb and index finger which has been bolstered with an additional piece of flexible fabric on Delta Plus VECUT41GN Gloves. This area of the glove is inherently weak, as it becomes stretched when a fist is made to grip material. This addition ensures rips, tears and splits don't occur.
Materials Used in the Construction of Delta Plus VECUT41GN Safety Gloves
- Support Fabric: Polyester (100%)
- Coating Material: Nitrile foam (100%)
Additional Documentation
