UCi Nitrilon Duo-Lite 18gg Nitrile Coated Precision Gloves
Thanks to their lightweight, ergonomic 18 gauge design, UCi Nitrilon Duo-Lite 18gg Nitrile Coated Precision Gloves are the ideal pair of gloves for builders and construction professionals handling material and machinery that requires you to be intricate and accurate. Their thick sandy nitrile coating works to absorb oils, grease and other harmful substances so your grip strength and stability aren't compromised on the job.
Please note these gloves are sold as a pair.
What's Included?
- 1 x Pair of Nitrile Gloves
Which Size Is Right For Me?
Finding the right size for you could not be easier. Simply measure the circumference of your palm (ignoring the thumb area) and the length of your hand as indicated in the image below. Once you have your measurement, please consult the sizing chart below to find the correct size for your hand.
Once you have your measurements, please consult the sizing chart below to find the correct size for your hand.
| Size | Circumference of Palm (mm) | Length of Palm (mm) |
| Size 7 (Small) | 178mm | 171mm |
| Size 8 (Medium) | 203mm | 182mm |
| Size 9 (Large) | 229mm | 192mm |
| Size 10 (Extra Large) | 254mm | 204mm |
Click here to view our comprehensive glove sizing guide
Key Attributes and Information
- Snug 18 gauge fit promotes dexterity and accurate precision handling
- Waterproof design is ideal for use in wet and windy conditions this winter
- Lightweight duo-nitrile coating works to trap oil, grease and liquids that compromise grip strength and stability
- Top layer of nitrile is a sand blend to provide grip and bite when lifting and carrying
- Extended cuff prevents dirt and debris entering the glove at the wrist
- Nylon liner promotes a tight and stable grip that aids with handling, packing, lifting and carrying
- Knitted fabric is soft and comfortable for reduced hand fatigue and strain
- Available in four different sizes
Protection Ratings
Please view the information and table below for a better understanding of just how Nitrilon Duo-Lite Gloves work to protect your hands in different conditions.
EN 388
EN 388 is a European regulation governing the sale of gloves used for safety and protection. It determines the gloves performance when used whilst working in and around mechanical machinery by measuring abrasion, cut, tear and puncture resistance.
| Standard | Resistance Rating |
| Abrasion Resistance | Level 4 |
| Cut Resistance | Level 1 |
| Tear Resistance | Level 2 |
| Puncture Resistance | Level 1 |
| EN Cut Resistance | N/A |
Click here to view our in depth and comprehensive guide to all things EN 388
Suitable Environments and Applications
Please see the list below for a few suitable applications for UCi Duo-Lite Gloves:
Benefits of a Nitrile Coating
Nitrile is an incredibly flexible and porous coating that provides additional resistance to oil, fuel and chemicals. It works to trap these substances so your grip doesn't slip and slide about. Nitrile is used as a protective coating in gloves because it matches the pliability of latex with the hazard and injury protection properties of a heavier, woven glove.
18 Gauge Lightweight Design
A tight fitting lightweight glove has a number of advantages. Firstly, a tight gauge promotes a firm grip due to the compression of the muscles in the hand. It also lends itself to carrying and lifting, as there is no little to no excess material there to sag, rub or prevent a proper grip from forming.
Dual Waterproof Coating
The UCi Nitrilon Ultra uses a double nitrile coating, the second of which uses a gritty sand blend to aid with grip strength. An aggregate coating mix works by providing grit and bite to the palm as appose to a flat, smooth surface that would allow products and material to slip and slide around in damp and wet conditions.
Declaration of Conformity
Click here to view the declaration of conformity statement for this product
.jpg)
.jpg)